A lot of people make message boards and I have ALWAYS wanted to make/buy/own one! Unfortunately, I just don’t have the extra funds for something like this. I also haven’t had an extra canvas lying around. What I do have is cardboard! For some reason I always seem to have plenty of it! The nice thing about using cardboard for the backbone of this project is that it is highly customizable. You can make it any size or shape you want! I chose a decent sized, long, vertical board. The original plan was going to have a contrasting frame in that fun polka dot fabric, but I just couldn’t figure out how to make it work. I still wanted to use the fabric though, so I opted for pockets!
- Two or three pieces of cardboard cut to the same size (I used two)
- Two or three layers of batting depending on how plush you want your board (I used two layers of thin batting)
- Two contrasting pieces of fabric (one must be large enough to cover the cardboard)
- Ribbon (mine is about 1/4″ wide)
- Hot glue gun
- Sewing needle
- Use hot glue to attach your pieces of cardboard to each other. Doubling or tripling the boards will give them more strength.
- Cut the batting to the same size as the board. I used glue to attach the corners of the batting to the board, but this is up to you.
- Cut the main fabric to be about 2″ wider than the board on all sides.
- Cut any pockets as wide as the main fabric, but as tall as you want the pocket. Make sure you leave enough fabric to have 2″ extra at the bottom of the board and about 1″ extra to fold over the top edge of the pocket (like a hem).
- Lay the board face down on the back side of the main fabric (the batting should be sandwiched in the middle). Pull the edges up and glue them to the back of the board. Make sure the fabric is taut. Fold the corners under at an angle to make sure no loose edges will show from the front of the frame.
- For the pockets, fold the top edge in to prevent any loose edges from showing. Glue them to the board just like the main fabric. I have two pockets (one in the same pattern as the main fabric), but you can have as many as you want!
- Time for the ribbons! Cross the ribbons over the front of the fabric and glue the ends to the back of the board. These ribbons need to be tight or they won’t be able to hold anything. The number of crosses you can fit depends on the size of your board.
- Sew a button onto each cross. Make sure you go through all layers of the board with the needle to fasten it securely. Don’t worry, it is surprisingly easy to sew through cardboard!
- Attach a ribbon to hang it and that board is finished!The two close up pictures above are of my husband and my older sister (Carter’s mom)…the pictures are goofy, but they’re some of my absolute favorites!
Linking up here: