Tag Archives: Birthday

Birthday Hat

 

As promised here is the birthday hat I made for my nephew!  It is a simple cone design that can can be customized with shapes, numbers, and a super fun pom-pom!  I chose polka dots to match his birthday banner!

Materials needed:

  • Stiff felt
  • Scraps of soft felt
  • Pom-pom
  • Ribbon
  • Hot glue gun
  • Scissors
  • Ruler
  • Fabric marker

Instructions:

  1. Cut a length of stiff felt about 6-1/2″ x 12″.  This size can be larger for an older kid or adult if preferred.
  2. Pinch the middle of one of the twelve inch sides of felt and roll the felt into a cone.  Be careful not to crease the felt too much.  Apply hot glue where the two edges overlap.
  3. Use a ruler to measure the length from the tip of the cone to the shortest point on the side.  This should be about 6″.  Use the marker and the ruler to place marks around the bottom of the cone to satisfy your measurement.  Cut around the cone following the marks until the bottom of the cone is even all the way around.
  4. Cut a length of ribbon so that it will be long enough to tie in a bow under the child’s chin.  With the seam in the back of the hat, glue one end of the ribbon on the outside of one side of the cone.  Repeat this process with the other end of the ribbon.  Make sure these two ends are directly across from each other.  Cut the middle of the ribbon at an angle to prevent fraying.
  5. Cut a strip of felt in a complimentary color about 1″ wide (to cover up the ribbon ends from step 4).  Make sure this strip is long enough to surround the entire bottom edge of the cone.  Glue the strip to the bottom edge of the cone.
  6. Cut out a birthday number or other shapes in different colors and use the glue to decorate the hat.
  7. Apply a large spot of hot glue to the tip of the hat and hold the pom-pom in place until the glue sets.
  8. You’re all finished!  Let the celebrations begin!

Linking up here:

linkpartyCatch a Glimpse Button

1 Comment

Filed under Babies/Kids, Clothing, Fabric

Birthday Banner

My nephew is turning 1!  Since my family is coming from all over the place and has all sorts of different time commitments, we celebrated his birthday a few weeks early.  I saw this super fun confetti garland from Increasingly Domestic and had to make one for the party!  I decided to add letters to mine to personalize it for the kid (not that he can read, but he did like the fun colors!).  I also made the birthday hat, so be sure to look for that in an upcoming post!

Materials needed:

  • Felt sheets in several different colors (one sheet of each color should be sufficient for a banner of this size)
  • Ribbon scraps
  • Letter templates (I printed my from a word processor)
  • Circle template (I used the bottom of a candle jar – about 3-1/2″ diameter)
  • Fabric marker
  • Scissors
  • Sewing machine
  • Hot glue gun

Instructions:

  1. Trace several circles onto your felt using your circle template and felt marker.  I traced 4 circles onto each color of felt.  Since I found 8 different colors of felt, I had a total of 32 circles to create 2 separate chains.  Cut the circles out.
  2. Sew a line through the center of each circle so the circles are just touching at the edges.  Do not cut the threads in between the circles.  Increasingly Domestic provides an excellent photo tutorial for this process.
  3. If you need to create your letter templates, follow these directions.  If not, skip to the next step.  I used Microsoft Word to print out huge letters, but you can use any word processor.  Open the program and type out one of each letter that you will need on your banner.  Highlight the letters and try out different fonts until you find one you like.  Make sure it is thick enough to easily cut out.  I stopped at a font called Marker Felt.  Increase the font size until it is large enough for your banner.  My font size is 250.  Print out the letters and cut them out.
  4. Choose which circle will hold which letter and trace that letter onto a contrasting color of felt.  You might want to trace the letter upside down so any marker lines do not show on the finished product.  Cut the letters out.
  5. Time for the hot glue gun!  Use the glue gun to adhere the letters to the circles.  Make sure the letters are where you want them before attaching them to the circles.  Hot glue is not a very forgiving material when used with felt.
  6. Glue a loop of ribbon to the backside of the end circles.
  7. Hang up your banner and celebrate!  These circles have a tendency to twist on the chain (which is part of the charm), so you may want to hang the chain against a flat wall to keep the letters facing forward.

Linking up here:
PhotobucketAnything Related

2 Comments

Filed under Babies/Kids, Decorations, Fabric